Use a Pneumatic Forklift
You can normally find pneumatic forklifts in warehouses and shipping operations. Also known as pump trucks or pallet trucks, they are utilized in order to transport supplies and products around on wooden pallets utilizing metal forks that are mounted on a wheeled counterweight. The counterweight has a pump that can lift the forks off the ground. A pallet truck is intended to be operated by one individual.
Pallet trucks must be operated carefully to prevent loss of control while lifting heavy loads. Equipment should be inspected prior to operating. Clear the wheels area of any obstructions. Make sure that the handle could turn smoothly. The pallet should be stacked carefully to be able to guarantee that nothing will fall off during transportation.
In order to lower the forks and release air in the pump, squeeze the lever found on the inside of the metal loop on the end of the pallet truck's handle. The forks could then be pushed into the slots of the pallet. The forks should be centered in order to guarantee even distribution of the pallet's weight across them. Raise the forks from the ground by pumping the pneumatic lift's handle until the pallet has fully cleared the ground. Do not lift the pallet very high or the forklift could unbalance.
Move the pallet by pulling on the handle and dragging it behind you. It is dangerous to push the pallet ahead of you since the thrust could cause it to lose control. Slowly take turns and don't attempt to stop suddenly. Stop gradually, squeeze the lever, and the forks would lower to the ground. Lastly, remove the forks from the pallet by pulling them out. Return the pallet truck to its permanent location.