Nearly all of the time, businesses would spend lots of money to purchase their forklifts. It is essential, therefore to take good care of your equipment to protect your investment into the long run. It is a great idea to know the procedures which are undertaken in taking care of and maintaining this machinery.
By starting up the forklift and listening closely how it runs is one of the best ways to tell how good the engine is working. For instance, if there are any misses or knocks, the equipment is faulty and this must raise some concerns. Moreover listen carefully for any squealing noise that come from the belts as these sounds would provide you with a wealth of information.
Some of the main components requiring attention during maintenance include the gauges, horn, safety warning devices, the overhead guard and the lights. Any faulty components or burnt out light bulbs should be replaced as soon as they are noticed. It is also imperative to check the wiring.
The battery compartment terminals must be cleaned after the above components have been inspected carefully. If the terminals are not clean, be sure to clean them properly. Every cell of the battery has to be checked in order to ensure the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the equipment and after that change the filters. The hydraulic filter, the transmission filter and the fuel filters should be regularly replaced. Prior to fitting them, be sure to write the date on the new filters by utilizing a permanent marker to be able to keep track.
Once the oil change has been carried out and new filters have been fitted, visually check the drive axle from beneath the machinery. Be sure to grease the axle if there is any grease fitting. Check the engine belts for any frays or cracks. If you find any, fix the problem accordingly. Next, check each and every other component of the machine like the wheels. If any kind of fault or issue is detected, be certain to deal with it immediately in order to make certain the equipment is working at its safest and optimum levels.