Forklift Attachments Santa Rosa - Without forklift attachments, many jobs would be difficult, if not impossible. There are numerous forklift attachments that make jobs faster and safer to complete. In addition to general forklift training, operators must be properly training for each attachment they intent to use.
Forklift attachments come in a wide variety of hydraulic and non-hydraulic attachments. The benefits of utilizing a forklift attachment include decreasing:
1. Employee accidents;
2. Damage to stock;
3. Manpower;
4. Time; and
5. Fuel consumption.
Equipment Considerations
Forklift attachments can replace existing attachments or may be added to a machine that doesn’t already have one. Several equipment-related factors must be considered before any forklift attachment is replaced or added. These considerations include:
1. The forklift type;
2. The forklift’s capacity;
3. The carriage type; and
4. The number of hydraulic functions.
Not considering these issues will drastically increase the safety risks associated with operating the machine and its attachments. This can increase risks relating to operator safety, forklift damage, stock damage and more. There are further safety issues to take into consideration which can be discussed in more detail below.
Forklift Rating and Re-Rating
Forklifts are given lift capacity ratings by the manufacturer which will need to be adjusted if adding or changing a forklift attachment. There are calculators available online from forklift attachment manufacturers to estimate each attachments particular lifting capacity. It is important to note that only the forklift manufacturer can provide accurate lifting capacities.
Prior to installing any attachment, it is important to contact the local authorized dealer of the forklift brand being used and request that they re-rate the forklift in accordance with the attachment being considered for use. Once the forklift manufacturer has re-rated the machine, it will ideally have a new specification plate that is factory authorized. The upgraded specification plate replaces the original plate and needs to be installed with the new forklift rating showing.
Equipment Upgrades
Forklift attachments rely on the machine’s hydraulic function and are made up of a forklift valve that has a lever situated close to the operator. This creates two passages of pressurized hydraulic oil for powering the attachment features. While not all forklift attachments are hydraulic, hydraulic attachments often include more features than the forklift has valves. When this happens, the forklift needs to have one or more valves added. There are several methods of adding a valve. Forklift manufacturers make accessories for valve and hose routing. There are plenty of labor and parts involved which can be costly enough to make this an impractical solution. Alternative methods include adding a solenoid valve in conjunction with a hose or cable reel that diverts oil flow from an existing function. However, the operators’ view may be compromised due to the cable reels and hose installation. These parts also may be easily damaged by their location. There are kits available that use a solenoid valve and specialty hoses that allow for the reinforced braid to double as an electrical conduit. Since these hoses replace existing forklift hoses, they remain safe from external damage while maintaining clear vision for the operator.
Safety Considerations
Before using any type of forklift attachment, adequate training must be fulfilled. The operator needs to be able to remove, fit and operate the attachment.
Before using any forklift attachment, two safety issues need consideration.
Firstly, it is important to note that any kind of forklift attachment will reduce the machine’s nominal load rating. The nominal load rating is computed with a stock fork carriage and forks. However, the actual load rating may be substantially lower.
Second, the center of gravity will be affected by the use of any forklift attachment. This will reduce the forklift’s stability. Due to the attachment weight being situated in front of the fulcrum point, the forklift needs to be driven as though it is partially loaded even when it is empty. Operators need to travel gently and slowly every time they use an attachment and take extra care while turning. Check the forklift’s capacity to ensure that every attachment is listed on the data plate.
Specific safety checks must be made prior to using each forklift attachment. The attachment must be:
1. Appropriate for the specific forklift being used;
2. Appropriate for the specific load;
3. Attached correctly;
4. Properly locked; and
5. Permitted on the forklift’s data plate.
List of Common Forklift Attachments
Below is a list of popular forklift attachments and their general uses. There are many more attachments available than are listed here but this will cover the most widely-used. As you will see, the large variety of attachments available have the capacity to greatly increase the efficiency of many jobs.
SIDESHIFTER:
Allows the operator to move the forks laterally, allowing for easier placement of a load without the need to reposition the entire forklift.
FORK POSITIONERS:
Fork positioners allow the forks to travel apart or together with each other to adjust for different load sizes.
DIMENSIONING DEVICES:
Dimensioning devices feature cargo dimensions useful for creating better efficiency in trucks, trailers and warehouses. This technology is often used alongside billing systems that monitor volume.
ROTATOR:
Assists in righting skids that have tilted, handling custom load requirements and quick unloading. Many attachments include a rotator feature.
ROLL AND BARREL CLAMP:
The roll and barrel clamp simplifies grasping rounded loads such as barrels. It has numerous pressure settings for handling fragile items with less damage potential. This attachment often has a rotate function to change the load from a vertical to a horizontal position.
CARTON AND MULTIPURPOSE CLAMP:
The carton and multipurpose clamp has pressure settings and is used for handling more squared shaped loads. It easily masters boxes, bales and cartons.
POLE ATTACHMENTS:
Long, metal pole used in place of forks to lift rolled items such as carpet or linoleum.
SLIP SHEETER OR PUSH-PULL:
Allows operator to transport slip sheets by clamping onto slip sheets, as opposed to pallets, and either pulling the slip sheet onto wide and thin metal forks for loading or pushing the slip sheet to unload. Some variations of the attachment are Save, where the slip sheet is removed for reuse, or Standard.
DRUM HANDLER:
Allows for grasping drums, either with a spring-loaded jaw to grip the top lip of a drum, or with arms that encircle the drum, for transport.
DRUM AND STORAGE BIN TIPPER:
The drum and storage bin tipper helps to transfer loose or liquid items into other containers.
MAN BASKET:
The man basket is a lift platform to allow workers to complete jobs with brackets and railings and safety harnesses.
TELESCOPIC FORKS:
Allows operation in a warehouse using two pallet stacking where one shelf is placed directly behind another with no aisle between the two.
SCALES:
Enables operators to simultaneously weigh and transport pallets, eliminating the need to interrupt transport to travel to scales, and can be obtained in legal-for-trade weights for operations that bill by weight.
SINGLE-DOUBLE FORKS:
Single-double forks facilitate movement of a single platform or pallet or two side-by-side pallets. This is useful for transporting specialty items with the right attachments employed. It can be used with normal lifting tasks and stops the need for owning two separate machines. This greatly reduces the cost of maintenance and operation that is used with multiple forklifts.
SNOW PLOW:
Originally designed for snow removal, snow plow attachments can be used to move other loose items.
SKIPS:
Skips enable quick and safe waste removal to a skip or waste compactor. They may feature a bottom-emptying design or be a roll-forward model.
BOOMS AND JIBS:
Allow for extended reach of a forklift to transport suspended loads or loads that are stacked high or deep. They are available in different setups such as reach over and precision lifting or low profile fixed and extendable lengths.
Forklift Attachment PDF
